Here are some mallory tune up numbers for the IECO Vega 140 SOHC
CLICK HERE TO ALSO SEE
THE VEGA UNILITE PAGE
Dist parts NEW NUMBERS
1971-77 L4/RH 140 (Vega)
4558301 37, 45 SERIES
UNILITE ELECTRONIC IGNITION
4658301 38, 46 SERIES
UNILITE IGNITION TACH DRIVE
1971-77 L4/RH 140 (Vega)
2358301 23, 25 SERIES DUAL POINT
2458301 24, 26 SERIES DUAL POINT TACH DRIVE
MY OLD MALLORY YL/DP TUNE UP PARTS
320M ROTOR
225 CAP
29323 TUNE UP KIT
400 CONDENSER
25042X SD POINTS
25042 POINTS
CONTACT POINT ADJUSTMENTS
YL/DP DUAL POINT GAP: .022
DWELL EACH: 32 DEGREES
DWELL TOTAL: 41 DEG +/- 2 DEG
1-1/2" Diameter
Fuel Pressure Gauges
These high quality pressure gauges
can be mounted
directly into any 1/8" NPT
threaded pressure port for a
quick easy reference. Liquid
filled for improved needle
stability high vibration
applications. 270+ degree sweep
needle makes for quicker pressure
checks.
0-15 PSI Range - liquid filled . . . . . . . . . . . . . .
. . . . . 29724
USE THE BELOW FOR BOTH FUEL AND FOR OIL
PRESSURE LINES IF YOU ARE FULL MECHANICAL GUAGES.
Pressure Isolator
Kit For Mechanical Gauges
Mechanical pressure gauges offer
maximum accuracy but
can be a safety hazard. Whether
you want to monitor fuel,
oil, or even coolant pressure, you
can do it safely without
the risk of spraying fuel, hot oil
or coolant all over your
interior. Easy to install, just
hook a pressure line from
your engine compartment to one
side of the CNC
machined Mallory Pressure Isolator
and fill the line from
your gauge to the other side of
the isolator with a 50-50
mix of antifreeze and water. Your
gauge reads the
pressure instantly and accurately,
but safely. The isolator
kit includes the mounting bracket,
#4 AN fittings and is
compatible with gasoline,
alcohol/methanol, oil or even
coolant. The maximum recommended
pressure is 80 PSI.
0-80 PSI Isolator Kit (gauge not included) . . . . . . . .
29806
|